• Meets all requirements specified in ANSI/TIA-568.2-D CAT6 connecting hardware requirements • Snap in style keystone jack; Fire Retardant Grade: UL-94V-0 • The termination field is on the rear of the jack for easy access. • Can accommodate Conductor diameter in the range 0.5-0.65mm (AWG 22-24). • Connector wiring is universal and has installation color codes for both T568A and T568B wires schemes. • 25 Years System Warranty
Availability : Approx. Delivery Lead Time : 6-8 Weeks
Product Description
DME PROLINK’s Keystone Jacks RJ45 are designed to be used with all DME PROLINK compatible products. The jack is designed in such a way that it promotes consistent performance over the life of the system. This includes unique pair separation towers allowing for quicker and easier termination. The connector is configured in a 180° configuration such that the punch field is on the rear of the jack, allowing for rear termination. DME PROLINK System components meet or exceed the requirements for channel and component level performance for the TIA/EIA Category and cUL(us) Listed. Compatible with DME PROLINK’s Special Termination Tool called F-Tool.
TRANSMISSION PERFROMANCE
Meets all requirementsspecified in ANSI/TIA-568.2-D CAT6 connecting hardware requirements
ELECTRICAL
Electrical Insulation Resistance
500 MΩ min. @ 100V DC
Dielectric Withstanding Voltage
1000V DC or AC Peak Contact to Contact @ 60Hz
for 1 minute
MECHANICAL
Insertion / Extraction Life
750 Cycles Minimum
IDC Wire Gauge
22~24 AWG
PHYSICAL
Housing
High-impact, Flame Retardant Plastic, UL 94V-0
Spring Wire
Phosphor Bronze Alloy Plated with 50 micro-inch of gold
IDC
Phosphor Bronze Alloy with 100 micro-inch 100% Sn Alloy
DME PROLINK’s Keystone Jacks RJ45 are designed to be used with all DME PROLINK compatible products. The jack is designed in such a way that it promotes consistent performance over the life of the system. This includes unique pair separation towers allowing for quicker and easier termination. The connector is configured in a 180° configuration such that the punch field is on the rear of the jack, allowing for rear termination. DME PROLINK System components meet or exceed the requirements for channel and component level performance for the TIA/EIA Category and cUL(us) Listed. Compatible with DME PROLINK’s Special Termination Tool called F-Tool.
