PART NUMBER : D01715-FU3LSGY
• Performance exceeding Category 6 specifications of 250MHz
• Performance compliance to ISO/IEC 11801, ANSI/TIA-568-C.2 and YD/T 1019
• AWG 24, Solid Bare Copper
• Low Smoke Zero Halogen
• Fire rated to IEC 60332-1
• 25 Years System Warranty
Datasheet
Availability : 100 Rolls in Stock
DME PROLINK’s Category 6 F/UTP cables are manufactured and tested to the ANSI/TIA 568‐C.2, EN50173‐1 and ISO/ IEC 11801 Ed. 2.0 Category 6 specifications. DME PROLINK’s Category 6 F/UTP cable is designed for optimal support of High-Speed data protocols delivering 1 Gbps performance to the workstation. Each cable consists of 8 colour coded 24AWG polyethylene insulated conductors. Each conductors are twisted together to form 4 pairs with varying lengths. These pairs are then put around a central ‘X’ shaped polyethylene filler/Separator which helps in maintaining and enhancing the cable performance. There is an overall Aluminum/Polyester foil around the pairs. DME PROLINK’s CAT6 cable is designed for quick and easy installation where no special tools are required.
• 10G BASE-T (Length <50m) • 1000BASE-T (Gigabit Ethernet) • 100BASE-T (IEEE 802.3) • 100BASE-VG-AnyLAN • 100 Mbps TP-PMD (ANSI X3T9.5) • 10BASE-T (IEEE 802.3) • 1.2 Gbps ATM • 55/155 Mbps ATM • 4/16 Mbps TOKEN RING (IEEE 802.5)
| Overall Diameter (mm) | 6.5 ± 0.3 |
| Sheath Thickness (mm) | 0.60 ± 0.05 |
| Sheath Surface | Clean, Frap, Satiation |
| Insulation Material | HDPE |
| Insulation Overall diameter (mm) | 1.04 ± 0.03 |
| Screening Material | Aluminum / Polyester Foil |
| Conductor Diameter (mm) | 0.52 (± 0.005) |
| Conductor Material | Solid Bare Copper |
| Impedance (Ω) @ 1-250 MHz 100 | ± 15 Ω |
| Delay Skew (ns/100m) @ 1-250 MHz | ≤ 45 |
| Max. DC Resistance (Ω/100m) | 9.38 |
| Max. DC Conductor Resistance Unbalance | (%) 5.0 |
| Mutual Capacitance (nF/100m) | < 5.6 |
| Capacitance Unbalance (pF/100m) | 330 |
| Nominal Velocity of Propagation (NVP) | 68% |
| Rip cord | Yes |
| Drain Wire | Yes |
| Max. Pulling Force (KG) | 11.5 |
| Min. Bend Radius during Installation 8xD (Overall diameter) at | ‐20°C to ±1°C |
| Min. Bend Radius after Installed | 4xD (Overall diameter) |
| Installation Temperature Range | 0°C to +50°C |
| Operating Temperature Range | ‐20°C to +70°C |
| Packing Length (Meters) 305 | ± 1.5 |
Sorry, no posts matched your criteria.
