IP Rated Outdoor FM Cabinet offer protection against the unauthorized access, physical impacts (vandalism), Water/Dust ingress in according to EN60529 standard, as well as industrial environmental challenges including high temperatures. Cabinets are available with integrated thermal management using either a fan and filter combination or air conditioner to control internal temperatures for protecting sensitive 19” rack equipment from water and harmful environmental contaminants and heat. RAL7035 light gray powder coated provides high corrosion resistance. IP Rated Outdoor FM Cabinet are employed in the most various environments e.g. Factories, warehouses, İndustrial areas, railways, Highway, military industry etc. Fully gasket type door, front door combined with 3 point locking mechanism for superior security, also rubber plug type cable grommets are available on the base plate, vertical mounting rails are adjustable throughout the entire depth of the enclosure. This cabinet usually comes with accessories like Lights, Lightning Protection, Plinth, Grounding Bus Bar etc.
Double Layer Insulation Structure: Outer plate is 1.5mm thick Galvanized Sheet and inner plate is 1.0mm thick Galvanized Sheet.
Double-layer insulation structure with insulation material 20mm EPS
19’’ mounting rails with 2.0mm thickness made of Galvanized sheet
Mounting method: Floor mount (Plinth with 100mm) Plinth Sheet: Galvanized Sheet (Thickness 2.0mm)
Doors: Front door and Rear door. Both equipped with anti-theft door look.
Accessories: 4 Nos. of Standard 42U 19" mounting rails (with 1-42U mark), 1 No. of Access control, 1 No. of AC 220 LED Light, 1 No. of Grounding bar, Removable bottom cover, 1 No. of Lightning protection grounding rod, Integrated DC120W Heat Exchanger.
EX series heat exchanger is designed for outdoor telecommunication cabinet or control cabinet. It has high reliability can be easily mounted. The heat exchanger can work after plug in. And the output can be automatically adjusted when internal heat load changes, any fault can be read remotely through RS485 interface from monitoring system. EX series heat exchanger works as shown in the figure, the unit’s internal loop sucks hot air from upper opening and the heat is dissipated to external air in the heat exchanger core. The external loop sucks cold air from lower end and discharge the hot air from the upper opening.
D37X-IP554280100GCG
IP55 Outdoor Floor Mount (FM) Cabinet, 42U, 2150mm (H), 800mm (W), 1000mm (D), with Universal Lock, Grey (RAL 7035) including 100mm High Plinth, Double Layer Insulation, Galvanized Steel with Accessories (1x DC120W/k Heat Exchange, 4 x 19” 42U Mounting Rails, 1No. Of LED Light, 1No. of Lightning protection, 1 x Grounding Bus Bar, 1 Set of Related Accessories)
IP Rated Outdoor FM Cabinet offer protection against the unauthorized access, physical impacts (vandalism), Water/Dust ingress in according to EN60529 standard, as well as industrial environmental challenges including high temperatures. Cabinets are available with integrated thermal management using either a fan and filter combination or air conditioner to control internal temperatures for protecting sensitive 19” rack equipment from water and harmful environmental contaminants and heat. RAL7035 light gray powder coated provides high corrosion resistance. IP Rated Outdoor FM Cabinet are employed in the most various environments e.g. Factories, warehouses, İndustrial areas, railways, Highway, military industry etc. Fully gasket type door, front door combined with 3 point locking mechanism for superior security, also rubber plug type cable grommets are available on the base plate, vertical mounting rails are adjustable throughout the entire depth of the enclosure. This cabinet usually comes with accessories like Lights, Lightning Protection, Plinth, Grounding Bus Bar etc.
IP55 Outdoor Floor Mount (FM) Cabinet, 42U, 2150mm (H), 800mm (W), 1000mm (D), with Universal Lock, Grey (RAL 7035) including 100mm High Plinth, Double Layer Insulation, Galvanized Steel with Accessories (1x DC120W/k Heat Exchange, 4 x 19” 42U Mounting Rails, 1No. Of LED Light, 1No. of Lightning protection, 1 x Grounding Bus Bar, 1 Set of Related Accessories)
Double Layer Insulation Structure: Outer plate is 1.5mm thick Galvanized Sheet and inner plate is 1.0mm thick Galvanized Sheet.
Double-layer insulation structure with insulation material 20mm EPS
19’’ mounting rails with 2.0mm thickness made of Galvanized sheet
Mounting method: Floor mount (Plinth with 100mm) Plinth Sheet: Galvanized Sheet (Thickness 2.0mm)
Doors: Front door and Rear door. Both equipped with anti-theft door look.
Accessories: 4 Nos. of Standard 42U 19" mounting rails (with 1-42U mark), 1 No. of Access control, 1 No. of AC 220 LED Light, 1 No. of Grounding bar, Removable bottom cover, 1 No. of Lightning protection grounding rod, Integrated DC120W Heat Exchanger.
EX series heat exchanger is designed for outdoor telecommunication cabinet or control cabinet. It has high reliability can be easily mounted. The heat exchanger can work after plug in. And the output can be automatically adjusted when internal heat load changes, any fault can be read remotely through RS485 interface from monitoring system. EX series heat exchanger works as shown in the figure, the unit’s internal loop sucks hot air from upper opening and the heat is dissipated to external air in the heat exchanger core. The external loop sucks cold air from lower end and discharge the hot air from the upper opening.
